• InterBBS OneLiners..

    From Bucko@21:4/131 to All on Sat Feb 2 19:08:35 2019
    Hey folks, quick question.. How are you guys using the Oneliners program? I
    put it in my prelogin menu and when it runs it shows the menu then you have
    to choose whether to view or add or quit. Is there one that comes up like the base setup where it just says add? yes or no? I am using Daryl Perry's
    version from 2017.. What is everyone else doing?

    --- Mystic BBS v1.12 A42 2018/12/30 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Bucko@21:4/131 to All on Sat Oct 30 12:47:44 2021
    Is there an update to Daryl Perry's InterBBS oneliners?? Since updating to A47 it boots but I can't view the liners. I can add with no problem.. I'm at a loss here.. Any have ideas??

    Al

    ... Some people have no idea what they're doing, and are really good at it!

    --- Mystic BBS v1.12 A47 2021/09/29 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Havok@21:4/10 to Bucko on Sat Oct 30 14:59:00 2021
    Is there an update to Daryl Perry's InterBBS oneliners?? Since updating
    to A47 it boots but I can't view the liners. I can add with no
    problem.. I'm at a loss

    Hello

    One make sure you have python installed if you have not already, then make sure python2 if picked as the one to use.

    for linux it would be:

    One would be python --version
    and my sure it is set in mystic, mystic/configuration/general settings/
    python2 library. mine show /usr/bin/python2.

    I'm guessing windows would be c:\python2

    I just went trough 4 versions and 3 of the four were fine.

    |08Thanks|04...

    |04Greg |12Youngbl|04ood aka |04Hav|12ok|15

    ... Error, no Keyboard - Press F1 to Continue.

    --- Mystic BBS v1.12 A47 2021/10/25 (Linux/64)
    # Origin: After Hours BBS|ah-bbs.com:2333
    * Origin: fsxNet FTN<>QWK Gateway (21:4/10)
  • From Bucko@21:4/131 to Havok on Sat Oct 30 15:46:43 2021
    On 30 Oct 2021, Havok said the following...


    Hello

    One make sure you have python installed if you have not already, then make sure python2 if picked as the one to use.

    for linux it would be:

    One would be python --version
    and my sure it is set in mystic, mystic/configuration/general settings/
    python2 library. mine show /usr/bin/python2.

    I'm guessing windows would be c:\python2

    I just went trough 4 versions and 3 of the four were fine.

    Thanks...


    It's weird, it all is set correctly, in fact it runs when I call it. I get the menu and can add to it, I just can't view the liners.. Not sure what is causing the issue. I am looking into the python27.dll file in the upgrade docs it says to leave both the settings blank in the general settings, but it also says if blank settings don't work then set them so I will try that.. Thanks for the tip.. I will post back if it works..

    ... Message encrypted: Press ALT-F4 to read encoded message

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Bucko@21:4/131 to Havok on Sat Oct 30 15:57:33 2021
    No, that wasn't it, Python is running properly.. The software is just not finding the messages.. I will keep trying.. LOL

    Thanks again...

    Al

    ... The seminar on time travel will be held two weeks ago

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Havok@21:4/10 to Bucko on Sat Oct 30 18:12:00 2021
    No, that wasn't it, Python is running properly.. The software is just
    not finding the messages.. I will keep trying.. LOL

    And you have it set for the right message DAT file, like mime is
    ibol 36

    |08Thanks|04...

    |04Greg |12Youngbl|04ood aka |04Hav|12ok|15

    ... Top secret! Burn before reading!

    --- Mystic BBS v1.12 A47 2021/10/25 (Linux/64)
    # Origin: After Hours BBS|ah-bbs.com:2333
    * Origin: fsxNet FTN<>QWK Gateway (21:4/10)
  • From Bucko@21:4/131 to Havok on Sat Oct 30 20:48:59 2021
    On 30 Oct 2021, Havok said the following...


    And you have it set for the right message DAT file, like mime is
    ibol 36


    Yes, it was working fine, everything showed up fine.. After updating to A47 the V function doesn't work.. Just strange..

    ... Fer sell cheep: BBS spel chekker. Wurks grate.

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From paulie420@21:2/150 to Bucko on Sun Oct 31 05:27:08 2021
    Yes, it was working fine, everything showed up fine.. After updating to A47 the V function doesn't work.. Just strange..

    Its because Mystic uses a different ANSI viewer and a command within the MPL needs to be changed to the new syntax that Mystic uses; I also believe I had to create an accompanying .ini file to go with the template.

    When you press V, mystic displays the scrollable info in an ansi template; and that system and command has changed in a47.

    I sent you my updated mrc_edit, and can pull the interbbbs one - but it is easy once you understand whats going on... I'd have to grab examples to post here as I did this some months ago. But its the ansi viewer command and new .ini file that goes with thatever template you're using.



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A47 2021/10/25 (Raspberry Pi/32)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
  • From Bucko@21:4/131 to paulie420 on Sun Oct 31 10:12:13 2021
    On 31 Oct 2021, paulie420 said the following...


    Its because Mystic uses a different ANSI viewer and a command within the MPL needs to be changed to the new syntax that Mystic uses; I also
    believe I had to create an accompanying .ini file to go with the
    template.

    When you press V, mystic displays the scrollable info in an ansi
    template; and that system and command has changed in a47.

    I sent you my updated mrc_edit, and can pull the interbbbs one - but it
    is easy once you understand whats going on... I'd have to grab examples
    to post here as I did this some months ago. But its the ansi viewer command and new .ini file that goes with thatever template you're using.


    And that is probably what is wrong with the MRC also.. Ok you got me going in the right direction now.. Thanks...

    ... A SQL query walks into a bar and sees two tables. Asks: 'Can I join you?'

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Havok@21:4/10 to Bucko on Sun Oct 31 10:12:00 2021
    Yes, it was working fine, everything showed up fine.. After updating to A47 the

    Strange, I'm running the latest linux release with no troubles.

    |08Thanks|04...

    |04Greg |12Youngbl|04ood aka |04Hav|12ok|15

    ... DOS=HIGH? I knew it was on something...

    --- Mystic BBS v1.12 A47 2021/10/25 (Linux/64)
    # Origin: After Hours BBS|ah-bbs.com:2333
    * Origin: fsxNet FTN<>QWK Gateway (21:4/10)
  • From Bucko@21:4/131 to Havok on Sun Oct 31 16:44:38 2021
    On 31 Oct 2021, Havok said the following...

    Yes, it was working fine, everything showed up fine.. After updating A47 the

    Strange, I'm running the latest linux release with no troubles.

    From what I have been told it is a minor modification due to the new Ansiviewer of A47.. I will figure it out. :) Thanks for all the help though...

    AL

    ... Multitasking: Reading in the bathroom

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From bcw142@21:1/145 to Bucko on Sun Nov 28 18:42:52 2021
    On 30 Oct 2021, Bucko said the following...
    It's weird, it all is set correctly, in fact it runs when I call it. I
    get the menu and can add to it, I just can't view the liners.. Not sure what is causing the issue. I am looking into the python27.dll file in
    the upgrade docs it says to leave both the settings blank in the general settings, but it also says if blank settings don't work then set them so
    I will try that.. Thanks for the tip.. I will post back if it works..

    First thing to do is review the whatsnew.txt for updates that would have changed the code, like the way variables are handled and set. Other than
    that my python2 line is:
    Python2 Library /usr/lib/x86 64-linux-gnu/libpython2.7.so.1.0
    So full path and names which did make a difference, it's what made python2 work on my A47 Ubuntu system.

    ... There are two types of people; those who finish what they start and

    --- Mystic BBS v1.12 A47 2021/09/07 (Raspberry Pi/32)
    * Origin: Mystic Pi BBS bcw142.zapto.org:23 (21:1/145)
  • From Bucko@21:4/131 to bcw142 on Sun Nov 28 20:30:48 2021
    On 28 Nov 2021, bcw142 said the following...


    First thing to do is review the whatsnew.txt for updates that would have changed the code, like the way variables are handled and set. Other than that my python2 line is:
    Python2 Library /usr/lib/x86 64-linux-gnu/libpython2.7.so.1.0
    So full path and names which did make a difference, it's what made
    python2 work on my A47 Ubuntu system.

    Thanks for the info, I will play with it again this week. Hopefully, get it working...

    Al

    ... I don't have the time for a hobby. I have a computer.

    --- Mystic BBS v1.12 A47 2021/11/18 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)